Upper/thru Registration failure

royabouarraj · Post by **royabouarraj** » Wed Sep 19, 2012 5:09 am

1. Brekeke Product Name and version: Brekeke SIP server for Brekeke PBX, Version 2.4.4.8 , Pro

2. Java version: JAVA 6

3. OS type and the version: Windows Server 2003

4. UA (phone), gateway or other hardware/software involved: UA / Brekeke SIP Server/ Upper Server

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 9

6. Your problem:

I am trying to use brekeke's upper/thru registration to bypass the blocked 5060 SIP port, in other words I need Brekeke to behave as an outbound SIP proxy with the port the I choose, I am using xpro and all my test calls are failing with release cause 603-Decline, I set the outbound proxy server as my brekeke sip server with port 15060, my sip phone logs in (registers) but i don't know where, when I check my upper server nothing seem to be registered on it, and when I attempt to make a call I get a direct release cause 603-decline.

Any suggestions on how to solve this issue?

Thanks

Hulia · Post by **Hulia** » Wed Sep 19, 2012 11:15 am

Are you using the Authentication in the Brekeke SIP Server?
Its default is "on".

You must set it "off" if you don't use the Authentication.
The settings is in the [Configuration]->[SIP] page -> [Authentication].
---------------
REGISTER = on/off (default is on)
INVITE = on/off (default is on)
---------------

If you want to use the Authentication, you must create users in the [User Authentication] page.
If don't create users, you will get "603".

Tata · Post by **Tata** » Wed Sep 19, 2012 11:44 am

Who blocks the port 5060?