Calls through firewall only work on local Brekeke Extensions

Discuss any topic about Brekeke SIP Server.

Moderator: Brekeke Support Team

Post Reply
zoldy
Posts: 20
Joined: Fri Jan 29, 2010 7:20 am

Calls through firewall only work on local Brekeke Extensions

Post by zoldy »

1. Brekeke Product Name and version:
Brekeke SIP Server
2. Java version:

3. OS type and the version:
Windows 2003 Server
4. UA (phone), gateway or other hardware/software involved:
Mitel
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
When the client is connected directly to the brekeke everything works great.

When I connect the client through firewall only calls between other brekeke extensions work. Calls routed to Mitel from Brekeke come back not found.
hope
Posts: 862
Joined: Tue Jan 15, 2008 4:08 pm

Post by hope »

is mitel registered at brekeke?
who sent 404 not found?
is there any dial plan rule which will apply to the call to mitel?
zoldy
Posts: 20
Joined: Fri Jan 29, 2010 7:20 am

Post by zoldy »

Yes I can call the mitel fine when I register directly to the brekeke and not through the firewall.

When I register through the firewall mitel says not found... but network trace shows the extension is correct. I assume it is because the brekeke shows the external ip to the mitel
Mcgee
Posts: 18
Joined: Thu Mar 27, 2008 12:21 pm

Post by Mcgee »

Do you know which part of INVITE packet sent from the Brekeke indicates the external ip address?
Can you paste the INVITE packet here?
Post Reply