ITSP Toplink

Serhat · Post by **Serhat** » Fri Feb 13, 2009 9:49 am

1. Brekeke Product Name and version:
Brekeke PBX, Version 2.2.6.2 , Basic

2. Java version:
jre6

3. OS type and the version:
SBS 2008

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

How can I register the ITSP Toplink (Germany) and what for a dial plan I have to configure? I hope anyone has a solution...

Best regards

Serhat

Haddas · Post by **Haddas** » Fri Feb 13, 2009 11:33 am

hi,

use ARS in the PBX. you don't have to use DialPlan for register.

other ITSP sample settings may help you.
http://www.brekeke-sip.com/wiki/index.p ... i=fe3ca084

Serhat · Post by **Serhat** » Fri Feb 13, 2009 4:11 pm

okay, I'm using ars, but what is with the other configuration? I get a registration to the ITSP and when I make a call intern/extern the call goes directly to the voicebox (voicebox is deactivated). I don't get a ring? All the settings I have tested but do not come further!

SIP server -> system configuration:
- which settings should be in the system (network interface)?
- External IP address pattern?
- UPnP?
- etc...

SIP server -> system SIP:
- Nat Traversal?
- Authentication?
- Upper Registration?
- etc...

PBX -> Options Settings:
- SIP settings?
- etc...

must I configure pattern in/pattern out on the ARS?

Thanks for your help

Serhat · Post by **Serhat** » Tue Feb 17, 2009 9:32 am

nobody an idea?

Haddas · Post by **Haddas** » Fri Feb 20, 2009 11:50 am

Since you already registered to the ITSP, you don't need any configuration in the SIP Server.

Did you make a user in the PBX?
If you don't yet, you need to make users in the PBX.
And then you need to register your SIP client in the SIP Server.

Serhat · Post by **Serhat** » Fri Feb 20, 2009 12:20 pm

I solved it alone...

thanks.

Haddas · Post by **Haddas** » Mon Feb 23, 2009 11:46 am

That's nice!