SIP to TAP setup and Troubleshooting

[Vanwinklekevin]

1. Brekeke Product Name and Version:
Responder SIP Server Version 3.14.5.17

2. Java version:
Eclipse Temurin JDK 11

3. OS type and the version:
Microsoft Windows Server 2019 Standard

4. UA (phone), gateway or other hardware/software involved:
Ethernet to Digione SP

5. Your problem:
Is there a way to send out TAP via the SIP to TAP plus a dial plan to a TAP device or do I need SIP as well? We have tested the message out successfully but cant send a message from the Responder system to the SIP server then out via the SIP to TAP.

[james]

Do you want to forward SIP message to a TAP transmitter through two Responder SIP Servers?

Like this?

Responder --(SIP)--> SIP Server 1 --(SIP)--> SIP Server 2 --(TAP/TCP)--< Digione SP --(TAP/serial)--> TAP Transmitter

[Vanwinklekevin]

No we want to send it out one Sip to a trap transmitter
Responder --(SIP/TAP)--> --< Digione SP --(TAP/serial)--> TAP Transmitter (Phillips Care Event)

Does the SIP server require a SIP connection to create the TAP connection?

[james]

Responder SIP Server converts SIP to TAP so Digione and Phillips don't have to support SIP.

[Vanwinklekevin]

Is this setup in the Dial plans to translate from SIP to TAP? I can't find any info about the process on the wiki. Could someone point me in the right direction?

[james]

If it is Responder SIP Server, there is a default DialPlan rule named "SIP_TAP". It handles SIP-TAP conversion.
Also refer to the Responder SIP Server's Reference Guide for more details.