HOW make ARS to receive the call from PSTN via gateway

tho2016 · Post by **tho2016** » Thu Jun 16, 2016 6:52 am

1. Brekeke Product Name and Version:
3.4.5.1
2. Java version:
1.7.0_91
3. OS type and the version: linux
2.6.32-573.12.1.el6.x86_64
4. UA (phone), gateway or other hardware/software involved:
Gateway mediatrix FXO
5. Your problem:
How make ARS to receive the call from PSTN to transfer extension number.

Thanks your help!

janP · Post by **janP** » Mon Jun 20, 2016 2:12 pm

Have you found this?
http://wiki.brekeke.com/wiki/Mediatrix-1204

Mr Tho · Post by **Mr Tho** » Wed Jun 22, 2016 6:19 pm

janP wrote:Have you found this?
http://wiki.brekeke.com/wiki/Mediatrix-1204

This guide only use for Mediatrix and Brekeke same network.
How about Brekeke is IP public, gateway is ip private.
in Mediatrix, you must config call router.
Not easy as this link http://wiki.brekeke.com/wiki/Mediatrix-1204

llucy · Post by **llucy** » Mon Aug 01, 2016 9:21 pm

Mr Tho,

If you want to have a gateway behind NAT or with a dynamic IP address, you would need to register the gateway to the PBX.
You can route outbound calls to the gateway with [Target] = @<registered ID> in the deploy pattern at the ARS.

Lucy

tho2016 · Post by **tho2016** » Thu Sep 01, 2016 12:59 am

Hi all,

I know how to config on ARS with gateway, now it work fine with mediatrix gateway.