Calling name and number on outbound calls

ipfreely · Post by **ipfreely** » Wed Dec 15, 2010 4:35 pm

1. Brekeke Product Name and version:Mtpbx

2. Java version:

3. OS type and the version:win2008r2

4. UA (phone), gateway or other hardware/software involved:any Endpoint - sangoma netborder tdm gateway

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem: what V files are used to populate the name and number for outbound calls from mtpbx to gateway.

hope · Post by **hope** » Thu Dec 16, 2010 11:07 am

do you need to modify the caller id and sip number for outbound call?
you can define it in ARS pattern out deploy pattern From

ipfreely · Post by **ipfreely** » Thu Dec 16, 2010 1:18 pm

Hi Hope,
Yes please, I would like to modify both. My current ARS Out is setup as follows

<sip:&v5@192.168.10.102>

In the v5 option if I have a number there the outbound call fails, If I put a name there the call completes but there is no name or number identified in a packet capture.

If these fields are not populated what will Brekeke post to the PSTN, some default setting per tenant?

Thanks,
Chris A

hope · Post by **hope** » Mon Dec 20, 2010 1:30 pm

it will show the caller number, if caller is pbx user from will be the pbx user number showing in the tenant/users,