Modify URI

damatta · Post by **damatta** » Tue Sep 14, 2010 7:54 pm

1. Brekeke Product Name and version: BSS Version 2.2.6.2

2. Java version: 1.5.0_14

3. OS type and the version: Windows 2003

4. UA (phone), gateway or other hardware/software involved: X-Lite

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 8

6. Your problem:

Would like to strip '55' from 'From' field . Already tried to use below dialplan w/o success:

MATCHING PATTERN

$request=^INVITE
$addr=^192\.168\.200\.254
To=sip:11077611562@
$geturi(From)=sip:55(.+)@

DEPLOY PATTERN

$replaceuri=true
From=sip:%1@192.168.200.254
$target=sip.example.net
To=sip:8008880102@sip.example.net
$auth=false

Any help deeply appreciated.

taitan · Post by **taitan** » Wed Sep 15, 2010 5:59 pm

do you have any other DialPlan rules?
If so put the above rule in the top.

Does the SIP server forward a call to sip.example.net successfully?

damatta · Post by **damatta** » Thu Sep 16, 2010 2:51 am

Yes calls are being fowarded sucessfully but no URI modification.

taitan · Post by **taitan** » Thu Sep 16, 2010 10:53 am

it seems you are using a kind of old version...
I recommend you use the latest one.

anyway.. let you put "$replaceuri = true" in the DeployPatten.
I hope it solves your problem.

taitan · Post by **taitan** » Thu Sep 16, 2010 10:55 am

I think.. newer versions (2.4.x) don't have such a problem.

damatta · Post by **damatta** » Thu Sep 16, 2010 11:24 am

"$replaceuri = true" is in the DeployPatten already.

janP · Post by **janP** » Mon Sep 20, 2010 12:34 pm

the version 2.2 may not meet your requirement..
try 2.4.

damatta · Post by **damatta** » Wed Sep 22, 2010 7:40 am

Tried with version 2.4.7.0 w/o success either

hope · Post by **hope** » Wed Sep 22, 2010 10:17 am

is the dial plan in use for the call?
is the dial plan name shown at "active sessions"/this calll details/rule?
are you going to change callerID?
if so, set From in deploy pattern as
From = "%1"<sip:%1@192.168.200.254>

damatta · Post by **damatta** » Wed Sep 22, 2010 10:41 am

No success either...

james · Post by **james** » Thu Sep 23, 2010 12:46 pm

I don't have same issue.
I think your other rules or the provider cause the problem..

Can you paste all of your rules here?
Otherwise, let you contact Brekeke's support team

damatta · Post by **damatta** » Thu Sep 23, 2010 2:06 pm

Running a test proxy just to work on this so, there are no other rules.

hope · Post by **hope** » Fri Sep 24, 2010 1:55 pm

did you click "apply rule" button?
Capture packets with wireshark on sip server pc,
check if the From is changed in the INVITE sent from brekeke to sip.example.net

damatta · Post by **damatta** » Sat Sep 25, 2010 2:41 pm

Analysing captured packets we noticed that indeed 'from' field was successfully modified but what we really need to modify is 'remote party-id' field. Sorry for the mistake and thanks for help.

james · Post by **james** » Mon Sep 27, 2010 10:16 am

so.. did you modify 'Remote-Party-ID' successfully?

damatta · Post by **damatta** » Mon Sep 27, 2010 10:33 am

Not at all. Just 'From' field. Please inform how to modify it successfully. Thanks.

hope · Post by **hope** » Mon Sep 27, 2010 12:41 pm

how about set Remote-Party-ID in dial plan deploy patterns?
like:
Remote-Party-ID = sip:%1@192.168.200.254

damatta · Post by **damatta** » Mon Sep 27, 2010 1:38 pm

Solved, many thanks