Sending 404 when trying to send locally

dovid · Post by **dovid** » Mon May 03, 2010 5:52 am

1. Brekeke Product Name and version: SiP Server V: 2.2.7.8

2. Java version: Not sure

3. OS type and the version: Ubuntu

4. UA (phone), gateway or other hardware/software involved: Callweaver

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : None of those

Server has two IP's (not the real IP's

)
66.33.22.100
66.33.22.101

Brekeke is listening on 66.33.22.101. Call weaver is listening on 66.33.22.100. When the call comes in to the Brekeke Sip Server when doing a trace it shows a 404 error.

CallFlow -> ISP -> Brekeke (66.33.22.101) -> To Callweaver (on same box 66.33.22.100).

If in Brekeke I send the call to 66.33.22.101:5065 then it works. It seems that the brekeke is getting confused with the second IP when it should not.

dovid · Post by **dovid** » Wed May 05, 2010 5:44 am

I work around was to install OpenSipS listening on 5065 send it there and from the OpenSipS to send it to my CallWeaver.

Over all it seems like a bug in the Brekeke software.

Harold · Post by **Harold** » Thu May 06, 2010 4:38 pm

It seems you didn't configure the brekeke correctly..

Use "net.bind.interface" setting.
http://www.google.com/search?q=%22net.b ... ke-sip.com

dovid · Post by **dovid** » Tue May 11, 2010 5:21 am

I actually have that set up:

net.net1.interface=66.33.22.101
net.net1.interface-restrict=66.33.22.100

Harold · Post by **Harold** » Tue May 11, 2010 11:54 am

use net.bind.interface=66.33.22.101 too.