3pcc is not working?

[Niggy]

1. Brekeke Product Name and version:2.2.6.2

2. Java version:5

3. OS type and the version:xp sp2

4. UA (phone), gateway or other hardware/software involved:x-lite , grandstream 4port fxo

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :2

6. Your problem:
Hi everyone,
while ago i was able to use 3pcc feature in brekeke pbx & it was working properly, but now its not working!!
i used this URL :
http://<server-ip>:28080/pbx/3pcc?to=<ext1>&from=<ext2>&type=1
it keeps give me this error:
HTTP Status 404 -

type Status report

message

description The requested resource () is not available.
Apache Tomcat/5.5.27
what cud b the problem??

[hope]

you need to use 3pcc from the pc with the same IP patterns as what you set at options/valid client ip pattern

[Niggy]

you need to use 3pcc from the pc with the same IP patterns as what you set at options/valid client ip pattern

Thanks mr Hope, you're absolutely right its working fine now.
im so thankfull again..

[Niggy]

Well first thing in the ip patern i have entered 192.168.1 & left the last octet empty , is that format correct or should i put like this 192.168.1.x?

Second thing ,in order 3pcc 2 work i have to restart the PBX almost daily! & if i didn't restart PBX it keeps give me the same old error written above can someone tell me why?

[hope]

the IP pattern: 192.168.1.* (asterisk)

and the change will take effect after saving the Options settings without restarting pbx