not able to make call when connected via wifi

amipatel123 · Post by **amipatel123** » Tue Jan 27, 2009 8:20 am

1. Brekeke Product Name and version:
Brekeke sip server 2.0
2. Java version:
jdk 1.6
3. OS type and the version:
window vista
4. UA (phone), gateway or other hardware/software involved:
x-lite
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
i m using x lite as my softphone which is works fine with brekeke sip server when i connect
through LAN at both side.
but when i connect one of the client from wifi the registration is successful but not
able make a call.
it register with private ip of wifi network with sip server.
which kind of settings and dial plan need to resolve this problem?

taitan · Post by **taitan** » Tue Jan 27, 2009 2:58 pm

Is there any firewall or router between the SIP Server and SIP client on the Wifi?
What kind of SIP response did you receive from the SIP Server when you made a call from the client?

amipatel123 · Post by **amipatel123** » Tue Jan 27, 2009 10:24 pm

No there is no firewll between the SIP Server and SIP client on the Wifi. I am able to make call between two clients.but after receiving call voice I am not able to hear a voice.I got the session established response from Sip server.

When I try to connect from Wifi with firewall I face same problem.

taitan · Post by **taitan** » Wed Jan 28, 2009 7:53 pm

Are you using X-Lite in the Wifi side also?

Try RTP-relay at the Brekeke SIP Server.