One way voice on Brekeke

awais97 · Post by **awais97** » Sun Jul 13, 2008 1:51 pm

Brekeke Product Name and version: Brekeke PBX, Version 2.1.6.6 , Pro Evaluation

2. Java version: jre1.5.0_06

3. OS type and the version: windows xp

4. UA (phone), gateway or other hardware/software involved:x-lite, Audicodes MP-114 voip gateway

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

I have a pc connected with WAN on one network card and 2nd card on lan connecting with switch. Audiocodes is also connected on the switch another pc connected on switch. When i make call on pcs on lan the voice stream is fine. but when i make call from a pc on WAN it registers with PBX and makes call to other softphone, there is only one way call. one side can hear but other side can't.

any idea please.

taitan · Post by **taitan** » Mon Jul 14, 2008 10:42 am

HI

Where is the SIP Server located?
Is it on the PC which has two NIC?

awais97 · Post by **awais97** » Mon Jul 14, 2008 10:56 am

Yeah its located on the pc with two network cards. one WAn and one LAN

taitan · Post by **taitan** » Mon Jul 14, 2008 5:30 pm

Try RTP relay = on.

awais97 · Post by **awais97** » Fri Jul 18, 2008 11:59 am

RTP relay is already on.

lakeview · Post by **lakeview** » Fri Jul 18, 2008 4:27 pm

Hi,

Can you capture RTP packets on the server?
If so.. you can see why the one-way voice happens.