Very Intermittent drop calls in less than 1 minute..

tagaamo · Post by **tagaamo** » Fri May 23, 2008 7:49 pm

1. Brekeke Product Name and version: Brekeke PBX, Version 2.1.6.6 , Basic , License Users: 100, Concurrent: 50

2. Java version:1.6.0_06

3. OS type and the version:Windows XP SP3 pro 32Bit

4. UA (phone), gateway or other hardware/software involved:
Bugde Tone-BT200

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 1

6. Your problem: Very Intermittent drop call in less than 1 minute.. is there any body experiencing like this? is there any settings to be done so that drop call will gone?

Thank you.....

Ray Domugho
Solid Electronics Corp.
Philippines

hope · Post by **hope** » Tue May 27, 2008 9:57 am

Use the following links to check your settings, may help
http://www.brekeke-sip.com/wiki/index.p ... i=a231518b
http://www.brekeke-sip.com/wiki/index.p ... i=add5b880

tagaamo · Post by **tagaamo** » Wed May 28, 2008 1:33 am

Thanks for the reply but it does not help....

Also I try to Upgrade to PBX 2.2.1.6 Beta ...

Another problem arise
Pickup call don't function any more on BETA version

so I downgrade again to 2.1.6.6 again so we can use the pickup call feature.

is there any problem on Granstream BT200 model? we are currently using 30 units of this model

BudgeTone 200 - Firmware ver. 1.1.6.16 iLBC codec Bad voice quality
HT286 - Firmware ver. 1.0.7.19 iLBC codec Good voice quality

commstechadmin · Post by **commstechadmin** » Wed May 28, 2008 12:21 pm

Hi Ray (musta na),

I tried using Grandstream Handytone series before . The voice quality is excellent.

If you are using iLBC codec, the default payload type of grandstream is 97.

I believe Grandstream Handytone and budgetone series iLBC payload type are the same.

ONDO PBX supports iLBC payload type=98 only.
Just change the settings on your grandstream to 98, and it should work.

tagaamo · Post by **tagaamo** » Wed May 28, 2008 8:19 pm

Hi

I'm curently using iLBC codec on all HT286 AU phone the voice quality is good , but on BT200 and GXP2000 the voice quality is so bad.. so i only use PCMU codec on this model but there a bandwidth issue....