1. OnDO SIP Server/OnDO PBX version:
Brekeke PBX, Version 2.1.5.6 , Pro
ID: 00000001 , Users: 100 , Concurrent: 100
2. Java version:
1.6.0_03
3. OS type and the version:
MS XP Prof (2002 ver.) with SP2
4. UA (phone), gateway or other hardware/software involved:
Linksys SPA-3000
Grandstream-488
Datavox-200
X-Lite
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
PSTN with http://www.brekeke-sip.com/bbs/network/pattern2.html
ITSP with http://www.brekeke-sip.com/bbs/network/pattern8.html
between LAN_1 & LAN_2 with http://www.brekeke-sip.com/bbs/network/pattern3.html
6. Your problem:
The SIP server is not refresh the WAN IP address, when the ADSL system change IP.
------------------------------------------------------------------------------------
SIP server setup:
Network Interface address 1: xxxxxx.dyndns.org
DNS caching period (sec): 300
Auto interface discovery: on
Address Filtering IP address filter: disable
UPnP Enable/Disable: enable
Default router IP address: 192.168.1.16
Cache size: 200
Cache period (sec,0=disable): 86400
Refresh Interval (sec,0=disable): 30
-------------------------------------------------------------------------------------
The last version which working correct the Brekek PBX 2.0.7.2.
Regards,
Istvan
Dynamic IP upgrade problem
Moderator: Brekeke Support Team
-
- Posts: 528
- Joined: Tue Sep 20, 2005 9:10 am
- Location: Tannersville, Pennsylvania
This idea is excellent, but unfortunately it doesn't work. The problem is not that the address is refreshed too late but it is not refreshed at all.voipwell.com wrote:Have you tried disabling cache period by putting a zero there. Also try putting a zero at dns cache.
Unfortunately the old support was stopped, and I don't know where can I announce this kind of faults/bugs....
Istvan Tamas
Herati Ltd
Hungary
Herati Ltd
Hungary