How configure DID...???

tc-soporte · Post by **tc-soporte** » Mon Aug 27, 2007 9:35 pm

1. Brekeke Product Name and version: 2.0.7.2/217

2. Java version: 1.5.0_11

3. OS type and the version: Windows Server 2003

4. UA (phone), gateway or other hardware/software involved: GrandStream HT-496

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 9

6. Your problem:
How configure DID...???

My supplier of DID is didx.net and I need to know as I can form in my system bought OnDo PBX the DID's to this supplier.

Thank you

tc-soporte · Post by **tc-soporte** » Tue Sep 11, 2007 4:32 am

Please somebody can help me with this subject, we needed to form DID in our PBX Server and we do not know like.

I appreciate its attention

voipwell.com · Post by **voipwell.com** » Tue Sep 11, 2007 5:44 pm

Hi,

DIDX requires no setup in the pbx. Surprised? The reason is becsuse in the DIDX web site you can configure your number to ring at a sip address. For example let's say your public wan address for brekeke is 1.1.1.1 and you want the call to ring on extension 100 in the pbx. You would go to the DIDX web site and tell it you want your calls to go to 100@1.1.1.1 and the calls will ring to extension 100 in your pbx.

Willtsuru · Post by **Willtsuru** » Sat Oct 06, 2007 11:10 am

Hi all.
Just to inform that to receive a incoming call from DIDx if you have invite=on and register=on then you need create a dial plan to allow the calls from DIDx passtrough of your pbx.THis dial plan will take the IP address of the DIDx network and allow incoming calls from this provider to catch the desired user in your systemIf not you will receive a busy signal as answer.

Thanks.

tc-soporte · Post by **tc-soporte** » Fri Oct 12, 2007 9:20 am

Thanks for your aid

You could exactly indicate like serious the Dial Plan to me...???