Configuring SIPserver woth linksys SPA3102

SLma · Post by **SLma** » Mon Jul 23, 2007 6:24 pm

1. Brekeke Product Name and version:
2.1.0.4/226
2. Java version:
java-ver 1.6.0_01

3. OS type and the version:
os-name Windows XP
os-ver 5.1

4. UA (phone), gateway or other hardware/software involved:
SPA 3102 and a budgtone 101
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
I dont know how to configure the Linksysy SPA3102 with Sipserver for incoming and outgoing using PSTN line

jelly · Post by **jelly** » Thu Jul 26, 2007 9:29 am

see the spa 3000 setting shown below, which is the same as the spa3102:

http://www.brekeke.com/support/sipura/s ... fig_en.php

SLma · Post by **SLma** » Thu Jul 26, 2007 6:57 pm

Hi,
My problem with sipserver not with sip pabx. Plesae guide me how to set the dial plane for SIP server.

jelly · Post by **jelly** » Fri Jul 27, 2007 12:05 pm

Matching Patterns:
$request=^INVITE
To=sip:9(.*)@

Deploy Patterns:
To=sip:%1@SPA-3102_ip:SPA-3102_portnumber

Using the dial plan above, you dial 9 + xxx-xxxx then sip server will route it to SPA-3102, and SPA-3102 will route it to PSTN.

SLma · Post by **SLma** » Fri Jul 27, 2007 7:31 pm

Hi,
it is not working, can you tell me the setting for the spa3102 as well.

jelly · Post by **jelly** » Mon Jul 30, 2007 10:00 am

once you set up for the ARS, you do not have to do with Dial Plan.