for experts...

[ancuser]

1. Brekeke Product Name and version: 2.0

2. Java version: 1.5

3. OS type and the version: win 2003

4. UA (phone), gateway or other hardware/software involved: mediatrix 1204

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 2

6. Your problem:

Brekeke PBX supports the physical port selector in the gateway??

if i need make pstn call, doen pbx support selecting port in gateway??

[pltec]

Budy... can you explain better what do you want???

I have 4 IPPBX plug in gatways....

2 are in quintum DX2030 and 2 are in cisco 2600...

maybe I can help you!!!

trank´s and best regards

Rafael Moraes

PL - Tecnologia - Brazil

[ancuser]

thanks, well my problem is the follow...

i have mediatrix 1204 as gateway, so i can receive calls and make calls too, but my question is, if can i configure the pbx 'ARS' to make the calls only for ports 3 and 4 because the ports 1 and 2 are the principal lines for incoming calls... for example

port 1 to receive call
port 2 to receive call
port 3 to receive and make celular calls with 044614+number
port 4 to receive and make local calls with 9+number

some like this, i want to do but is the brekeke pbx ARS can does this, or in other part of pbx, how do i do?

i make calls for any place only marking 9+number but the call take any port...

my ARS is this:

matching patterns: to sip:9(.+)@

deploy patterns: to sip:$1@172.16.1.25:5060


best regards..

Francisco Gonzalez
ADN Consulting Mexico