1. Brekeke Product Name and version: 2. Java version: 3. OS type and the version: 4. UA (phone), gateway or other hardware/software involved: 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 6. Your problem: I have read all guides regarding BSS and ...

normally, only 445550000 one shown at registered clients. are the both the same registration time in the detail column? if delete both registration record and register ARS again, are both showing? I'm re-registering as you have suggested above. Exactly, there is only registration of 445550000 ...

Owo ! It's working ! Let me resume : In my case described above, PBX registered in ITSP's SoftSwitch with following configuration : 1. SIP Proxy -> Configuration -> SIP -> Thru registration = ON 2. PBX -> ARS -> [appropriate rule for ITSP] -> -> Register URI = sip:445550000@10.0.0.1 (ITSP's ...

I did it. There is nothing has changed. Sniffer shows the PBX doesn't still sends REGISTER request to ITSP's softswitch.

Upper and Thru Registration options are OFF within SIP Proxy.

Are there any ideas else?

The ARS for interconnection with ITSP is : Register URI : 10.0.0.1 Proxy address : 10.0.0.1 User : 445550000 Password : ******* Register Expire : 3600 Register update : 90 Patterns Pattern - OUT [Matching patterns] To : sip:(44.{7})@ [Deploy patterns] From : sip:445550000@ To : $1@10.0.0.1:5060 ...

Correct, both mentioned IP addresses are private. All described complex deployed in laboratory. PBX must register on ITSP SS (deployed in a lab too). The connection to PSTN through VoIP MGW is real and using for outgoing calls from an office. However, I want to check NAT Traversal in lab trial ...

1. Brekeke Product Name and version: Brekeke PBX ver. 2.4.4.8 Pro 2. Java version: 3. OS type and the version: Linux Ubuntu 9.04 4. UA (phone), gateway or other hardware/software involved: IPphones : VigorPhone 350; Cisco SPA5xxG; AudioCodes MP-118 5. Select your network pattern from http://www ...

I did exactly in accordance with the instruction mentioned in the post above. Everything is working from first attempt.

Hello ! I have examined above mentioned documents. My task is a little different - I need the PBX makes SQL request to DB based on CLI (Caller ID info) in order to call a customer file from DB. Same task usually is solving by TAPI interface within legacy PBX. Does IP-PBX supports something like TAPI ...