About IP Address

LeeFrederick · Post by **LeeFrederick** » Fri Jul 25, 2014 8:20 am

1. Brekeke Product Name and Version:
Version 3.2.4.3 Standard
Version 2.4.7.3 Standard

2. Java version:6

3. OS type and the version:win2003

4. UA (phone), gateway or other hardware/software involved:

5. Your problem:
If I have three network card on the server,and they link to different network,they all have gateways.

Network Card 1:
192.168.1.60
255.255.255.0
192.168.1.1

Network Card 2:
221.136.195.252
255.255.255.252
211.136.195.1

Network Card 3:
180.136.225.251
255.255.255.252
180.136.225.1

How can I choose a certain network card when I make a call? for example,I have three ITSP (IP-Telephony Service providers),When I choose the first ITSP to make a call,I need to use 180.136.255.251 as the internet access.
I think I can add an ACL on windows,if so,Any other settings need to be set on BREKEKE SIP SERVER?
Very Thanks!

ambrosio · Post by **ambrosio** » Fri Jul 25, 2014 1:15 pm

If you always use 180.136.225.251 for making a call, try the binding feature.
http://wiki.brekeke.com/wiki/Bind-Breke ... IP-address

If you need these three interfaces for each ITSP, you need to use three different SIP servers. (for example, use a virtual machine for each Brekeke SIP Server within the same physical machine.)

LeeFrederick · Post by **LeeFrederick** » Fri Jul 25, 2014 7:09 pm

Thank for your reply.
I found [Configuration]-[Network]-[Interface address 1,2,3,4,5] in the system,What's the use of these settings?Can I fill the three IP address in it,And add route on windows like below:
route add ITSP1's IP mask 255.255.255.252 180.136.225.1
route add ITSP2's IP mask 255.255.255.252 211.136.195.1
Will it work?
Very thanks!

ambrosio · Post by **ambrosio** » Mon Jul 28, 2014 1:16 pm

It seems work.