Multiple ITSP Routing ARS (Line1 is in use then line2)

[ehality]

1. Brekeke Product Name and version:

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
I just added a second Voip ITSP account to the PBX and both are successfully registered

how can I put a plan or ARS to do the following

If A is calling external destination use the 1st ITSP line if busy use the 2nd ITSP line if busy reject the call

If B is calling check the 1st ITSP line if busy use the 2nd ITSP if busy reject the call

also we are planning to add a third and fourth lines so please clarify if it is going to be different

Thanks

[hope]

pbx ars outbound route failover will help
which is at http://www.brekeke-sip.com/download/bpb ... sic_en.pdf
section 6.18