Failover Dialplan

mrir65 · Post by **mrir65** » Mon Nov 14, 2011 11:53 am

1. Brekeke Product Name and version: Brekeke PBX 2.4.7.3 basic bundled with sip server

3. OS type and the version:win 2003 server

4. UA (phone), gateway or other hardware/software involved:tenor

6. Your problem:
I have 2 different ITSP that I'm using them to route my calls .
one of my voip carriers get disconnected and gives me timed out,so I forced to change my itsp ip address in dial plan manually.
I need a way in Brekeke Sip server dial plan that when one ITSP ip address gets disconnected and timed out ,system automatically failover to other itsp ip address.

my dial plan rule is as follows:
matching pattern:
$request=^Invite
to=sip:00(.+)@

deploy pattern:
to=sip:%1@1st_ITSP(ip address):5060

I need the system automatically change from my first ITSP to Failover one(my second ITSP) as the the first one gets diconnected.

what do you recommend me to do.

Thanks

taitan · Post by **taitan** » Mon Nov 14, 2011 7:20 pm

If you use Advanced Edition, you can make a failover over the DialPlan.

http://wiki.brekeke.com/wiki/How-to-mak ... -Dial-Plan

mrir65 · Post by **mrir65** » Tue Nov 15, 2011 12:23 am

taitan wrote:If you use Advanced Edition, you can make a failover over the DialPlan.

http://wiki.brekeke.com/wiki/How-to-mak ... -Dial-Plan

Thanks for your help,but as i mentioned in topic i'm using Basic edition and version is 2.4.7.3,there is no way in this edition ?

janP · Post by **janP** » Tue Nov 15, 2011 10:36 am

There are no Failover option in basic edition.

mrir65 · Post by **mrir65** » Tue Nov 15, 2011 12:19 pm

janP wrote:There are no Failover option in basic edition.

So I have to upgrade my Brekeke PBX bundled with sip server to Pro edition?

janP · Post by **janP** » Tue Nov 15, 2011 7:48 pm

Wow, you are using Brekeke PBX...
Brekeke PBX's ARS has a failover feature which will meet your requirements.
Check the PBX's document.