Configure ITSP & OCS 2007 Proxy

JoBro · Post by **JoBro** » Tue Jun 16, 2009 5:15 pm

1. Brekeke Product Name and version: 2.3.6.0
2. Java version: 1.6.0 Update 13
3. OS type and the version: Windows 2008 x64
4. UA (phone), gateway or other hardware/software involved: ITSP & OCS 2007 R2
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 8
6. Your Problem:

Can someone please provide step by step instructions for configuring my ITSP "SIP" provider in the ARS setup page, and how to route all calls from the Brekeke SIP to my OCS 2007 box, which numbers in the following number range +61 2 8088 3000 - +61 2 8088 3099

ITSP Details
username 0280883000
PASSWORD IS **********
SIP Server: nsw.nexvoice.net.au

Brekeke IP 10.6.0.4
OCS Mediation Server: 10.6.0.3
OCS FrontEnd Server: 10.6.0.1

Internal Extension = 4 digits

Haddas · Post by **Haddas** » Fri Jun 19, 2009 11:32 am

Refer this.
http://wiki.brekeke.com/wiki/Brekeke_PB ... rosoft_OCS

JoBro · Post by **JoBro** » Sun Jun 21, 2009 6:37 pm

Yes i have already been to this link, and configured the Brekeke SIP Rules, but this does not help me with my sip trunk.

I have the sip trunk connected according to the Brekeke PBX status console, but when you ring the number it just disconnects.

Haddas · Post by **Haddas** » Mon Jun 22, 2009 11:11 am

ITSP --> Brekeke PBX --> OCS's Mediation Server --> OCS

Is it your deployment?

Do you have a SIP softphone? Test the following..

- Can you make a call from the ITSTP to the softphone via Brekeke PBX?
- Can you make a call from the softphone to the OCS via Brekeke PBX?