Brekeke SIP Trunk & OCS 2007 R2 configuration

JoBro · Post by **JoBro** » Tue Jun 02, 2009 1:21 am

1. Brekeke Product Name and version: 2.3.6.0
2. Java version: 1.6.0 Update 13
3. OS type and the version: Windows 2008 x64
4. UA (phone), gateway or other hardware/software involved: ITSP & OCS 2007 R2
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 8
6. Your problem:

Need help configuring my SIP Trunk provider in Brekeke.

I have been provided a SIP Server of "nsw.nexvoice.net.au" and a username and password.

I configured the server address in the upper registra address field, but i dont know how to authenticate to my provider, nor does it say anywhere that is has successfully authenticated to my provider, also how do i route all the calls to my ocs box.

my server ip's are as follows

Mediation Server: 10.6.0.3
Brekeke Server: 10.6.0.4

my number range is 0280883000 to 0280883099 which gives me 100 numbers.

hope · Post by **hope** » Tue Jun 02, 2009 11:55 am

http://wiki.brekeke.com/wiki/Brekeke_PB ... rosoft_OCS

JoBro · Post by **JoBro** » Mon Jun 08, 2009 10:23 pm

Thanks for that, but you still havnt answered my question on how to configure my sip trunk and confirm that it has successfully registered with my sip provider.

james · Post by **james** » Wed Jun 10, 2009 7:14 pm

Use Brekeke PBX instead of Brekeke SIP Server and set your account information at PBX's ARS settings.

Brekeke SIP Server will not be fit in your scenario.