How to allow some UA call-in and call-out ?

chantasaro · Post by **chantasaro** » Thu Mar 12, 2009 7:30 pm

1. Brekeke Product Name and version:Brekeke SIP Server for Brekeke PBX 2.2.6.2

2. Java version:

3. OS type and the version:red hat

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem: I would like to allow FXO Gateway to join to PBX system so my GW can't registered to SIP Server. I configue Authentication, REGISTER =on and INVITE=on.

Harold · Post by **Harold** » Fri Mar 13, 2009 6:37 pm

Hi
What is the name of the FXO gateway?
Does the gateway support REGISTER?
Does the gateway support Authentication?
If the gateway doesn't support Authentication, you need to disable Authentication or use "$auth=false" at the DialPlan.

chantasaro · Post by **chantasaro** » Sun Mar 15, 2009 7:06 pm

Hi Harold
What is the name of the FXO gateway?
It's Soundwin S2400

Does the gateway support REGISTER?
Does the gateway support Authentication?
Yes, It ok if not set Public IP Address in Interface address from SIP==> Configuration==>System==Network.

Thank you

Harold · Post by **Harold** » Sun Mar 15, 2009 11:31 pm

This will solve it.

---------------------------
[Matching Patterns]
$request = ^INVITE
$addr = <Soundwin's IP address>

[Deploy Patterns]
$auth = false
$continue = true
---------------------------

chantasaro · Post by **chantasaro** » Mon Mar 16, 2009 12:04 am

Hi Harold
Thank you for your invate, it work now.