after re installation of SIP Server after PC crash, no more

[brekeke888]

1. Brekeke Product Name and version:
Brekeke SIP Server , Version 2.2.6.2 Standard
ID: 00012075

2. Java version: EE5 SDK

3. OS type and the version: Windows Server 2003

4. UA (phone), gateway or other hardware/software involved:x-lite Soft Phone, PSTN SIP Phone, windows Mobile SIP Phone

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 6

6. Your problem: We had a server crash, and had to re install our brekek sip server. We did no chnages at all, use teh same hardware, teh same sip clients. We can dial to each otehr, the phone rings and pick up, but then there is NO AUDIO. Can anybody help?
Bernard Bowiz
Germany

[james]

Hi..

Why did you not describe the required information?

You know.. it is lack of information...
What kind of OS are you using?
Which version of Brekeke SIP Server are you using??
Also, Java Version???

[james]

if you are using Windows Firewall, Norton or any other firewalls on the PC, you need to disable it or open the RTP port range.

Refer to the link below.
http://www.brekeke-sip.com/wiki/index.p ... i=ad64f20c