URI / Requester Ports

damatta · Post by **damatta** » Fri Oct 24, 2008 12:42 pm

1. Brekeke Product Name and version: Brekeke SIP Server , Version 2.1.6.6 Standard

2. Java version: 1.5.0_14

3. OS type and the version: Windows 2003 Entreprise

4. UA (phone), gateway or other hardware/software involved: Grandstream HT-486

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 9

6. Your problem: Noticed that sometimes UA registers with different ports for SIP-URI and REQUESTER. That makes me losing incoming traffic from PSTN (DID). Any help will be deeply appreciated.

lakeview · Post by **lakeview** » Fri Oct 24, 2008 1:36 pm

Are UA clients behind NAT?
Disable STUN at UA settings.

damatta · Post by **damatta** » Fri Oct 24, 2008 2:14 pm

Yes, behind NAT. But, no STUN configured.

lakeview · Post by **lakeview** » Fri Oct 24, 2008 5:03 pm

go to server's GUI -> [Configuration] -> [SIP] -> [NAT traversal].
And select [Add 'rport' parameter (Receive)] = "true".

Try it.

damatta · Post by **damatta** » Sat Oct 25, 2008 4:04 am

It did not work out...

lakeview · Post by **lakeview** » Mon Oct 27, 2008 12:04 pm

Try the latest beta version..
http://www.brekeke.com/download/download_sip_beta.php

It has improved NAT detection feature.

damatta · Post by **damatta** » Tue Oct 28, 2008 3:05 am

No success after upgrade. Worst: now ALL DID's can't receive calls. BSS sends error 486 (busy here) for ALL incoming calls. Please help.

lakeview · Post by **lakeview** » Tue Oct 28, 2008 3:03 pm

Are you using Brekeke PBX ?

damatta · Post by **damatta** » Tue Oct 28, 2008 3:06 pm

Yes, I am.

lakeview · Post by **lakeview** » Tue Oct 28, 2008 3:27 pm

Do you have a user in the PBX?
If not, you need to create certain users in the PBX.

damatta · Post by **damatta** » Tue Oct 28, 2008 3:37 pm

We have both: PBX and BSS users.

lakeview · Post by **lakeview** » Tue Oct 28, 2008 3:45 pm

Hi damatta,

Can you paste 486 error response packet here?
Or, can you see"User-Agent" header in the response packet?

damatta · Post by **damatta** » Tue Oct 28, 2008 6:21 pm

Incoming traffic issue solved (NAT problem, not).Thanks.

Harold · Post by **Harold** » Tue Oct 28, 2008 11:45 pm

Try this DialPlan rule.
=========================================
[Matching Patterns]
$request = ^REGISTER
$globaladdr( Contact ) = true
$addr = (.+)
$globaladdr( "%1" ) = true
$port = (.+)

[Deploy Patterns]
&register.contact.addrport = %1:%2
&register.contact.nat = true
$continue = true
=========================================

damatta · Post by **damatta** » Wed Oct 29, 2008 2:08 am

After applying this Dial Plan, some lines became RED. So, I assume there are synthax errors.

Matching Patterns:

$globaladdr(Contact)=true
$globaladdr("%1")=true

Deploy Patterns:

&register.contact.addrport=%1:%2
&register.contact.nat=true

lakeview · Post by **lakeview** » Wed Oct 29, 2008 11:13 am

Hi all,

Harold's DialPlan seems no problem.

>> After applying this Dial Plan, some lines became RED. So, I assume there are synthax errors.

Don't worry. you can use these variables.
These variables are new from version 2.2 beta.. so they are not listed in the DialPlan's spell checker.

damatta · Post by **damatta** » Wed Oct 29, 2008 6:14 pm

Fine now

lakeview · Post by **lakeview** » Wed Oct 29, 2008 6:39 pm

Wow..

Does Harold's DialPlan solve the issue??

damatta · Post by **damatta** » Thu Oct 30, 2008 10:10 am

Well, partially... Signalling issue was solved (can receive calls) but not media (no audio).

lakeview · Post by **lakeview** » Thu Oct 30, 2008 11:23 am

Did you set "RTP-Relay=on"??
If not, try it.

damatta · Post by **damatta** » Mon Nov 10, 2008 1:23 pm

Yes, RTP Relay setting is ON and RTP relay (UA on this machine) is AUTO.