1. Brekeke PBX
2. Windows Server 2003
3. SIP Server
4. Your problem:
I would like to if I purchase Brekeke PBX 20 users product then will a single SIP account, that I created in Brekeke SIP PBX can call 30 simultaneous call from 30 different SIP soft phones using the same SIP account.
Use Case:
Single SIP user account is shared by 30+ SIP soft phone users and we have 40 SIP users. So actually there are 40 SIP accounts but there could be maximum of 30X40=1200 simultaneous calls. Which Brekeke PBX license should I buy?
40 License?
Or
1000+ License?
Brekeke PBX Max Simultaneous Calls per SIP User
Moderator: Brekeke Support Team
-
voipwell.com
- Posts: 528
- Joined: Tue Sep 20, 2005 9:10 am
- Location: Tannersville, Pennsylvania
Hi,
If you register multiple devices to a Brekeke SIP SERVER user, only the last one registered will be able to receive calls so it is not practical to do so if you need to receive calls. If your SIP SERVER user uses the ARS to route calls, then you will need either the Pro Version PBX which allows 1 simultaneous call for each user or the basic version which allows 1/2 simultaneous call per user.
If you register multiple devices to a Brekeke SIP SERVER user, only the last one registered will be able to receive calls so it is not practical to do so if you need to receive calls. If your SIP SERVER user uses the ARS to route calls, then you will need either the Pro Version PBX which allows 1 simultaneous call for each user or the basic version which allows 1/2 simultaneous call per user.