SIP settings on Internet in area where telephony sites are

abdullahkhan · Post by **abdullahkhan** » Sun Jan 06, 2008 10:43 pm

1. Brekeke Product Name and version: Sip server Version 2.1.6.2 Evaluation

2. Java version: jre1.6.0_03

3. OS type and the version: Windows XP sp2

4. UA (phone), gateway or other hardware/software involved: MSN on both sides for testing.

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

My SIP server is working well in the LAN. I checked with MSN 5.1 on both sides. But when I used it in WAN (Internet), it doesn't work. I also apply the settings as

SIP exchanger - Local Port [UDP]
Default Value: 5060
RTP Exchanger - From Minimum Port to Maximum Port [UDP]
Default value: 10000-10999

I also try the second option mentioned in the same text... the sip server is in the area where telephony sites like skype, voipcalls are banned, but a lot of softphone are still operating. They are using Voip tunnel.

May I used Voip Tunnel with the SIP server and How ?
Or Is there any other method to operate my SIP Server in the area ?

Regards & anticipation,

james · Post by **james** » Tue Jan 08, 2008 12:32 pm

use RTP relay.

go to [Configuration] -> [RTP]
and [RTP relay]=on.

abdullahkhan · Post by **abdullahkhan** » Tue Jan 08, 2008 11:23 pm

Thanks for reply,

I try it , but I am in the area where UDP 5060 is blocked. I think, I should use some tunnels. But from where & how ?

james wrote:use RTP relay.

go to [Configuration] -> [RTP]
and [RTP relay]=on.

Laurie · Post by **Laurie** » Wed Jan 09, 2008 12:49 am

Can you use another UDP port?
so.. you can set another port for SIP.

abdullahkhan · Post by **abdullahkhan** » Wed Jan 09, 2008 6:20 am

Laurie wrote:Can you use another UDP port?
so.. you can set another port for SIP.

I applied various ports like 5061, 4570 etc but whenever I changed it from the defult i.e 5060. The Softphones on LAN is also going to off.

I used the settings with X-Lite softphone, is there any body experienced in the X-Lite. Please help...... thank and anticipation...

Regards.

james · Post by **james** » Wed Jan 09, 2008 11:25 am

why is UDP 5060 blocked?
can you ask your provider to open the port?

anyway, you can specify the SIP port by setting [Configuration]->[SIP]>[Local Port] at the SIP Server.
and, you need to specify the SIP Server's IP address and port at X-Lite.

abdullahkhan · Post by **abdullahkhan** » Wed Jan 09, 2008 12:20 pm

james wrote:why is UDP 5060 blocked?
can you ask your provider to open the port?

anyway, you can specify the SIP port by setting [Configuration]->[SIP]>[Local Port] at the SIP Server.
and, you need to specify the SIP Server's IP address and port at X-Lite.

Dear , thanks for the interest, I already Quote that whenever I changed Local Port from 5060. Server can not reply even on LAN.

As per X-Lite config

SIP Account settings. .. Account Tab -> User ...888
Domain -> 192.168.x.x my local Computer IP on which BSS is installed.

Domain Proxy -> Check Register with Domain & Proxy Address -> IP of BSS computer.

All other options are defualt....

Dear , where I can put SIP Server IP and Port in X-Lite .... please can you put in detail as I did'nt see port.... there is only one option as Port used on Local Computer....

I am behind the NAT. My router is Azetch DSL 605 EU made in China

Regards,

Juan · Post by **Juan** » Wed Jan 09, 2008 12:47 pm

To setup a port at the x-lite you have to enter as Domain the IP address:portnumber. For instance 192.168.xx:3456.
Regards

abdullahkhan · Post by **abdullahkhan** » Tue Jan 15, 2008 1:15 am

Juan wrote:To setup a port at the x-lite you have to enter as Domain the IP address:portnumber. For instance 192.168.xx:3456.
Regards

Thanks to you all helping me in configuration SIP. I accurately set it ... Now any body can help me that how I can use my SIP Server for call to PSTN. I think , I should use FXO adopter......

I would like to use X-Lite from one computer and it passed second computer (SIP Server) and PBX Software of SIP Server automatically dial the PSTN no like 0013068876654 and X-Lite get the response....

Best regards for all

abdullahkhan · Post by **abdullahkhan** » Tue Jan 15, 2008 1:17 am

Juan wrote:To setup a port at the x-lite you have to enter as Domain the IP address:portnumber. For instance 192.168.xx:3456.
Regards

Thanks to you all helping me in configuration SIP. I accurately set it ... Now any body can help me that how I can use my SIP Server for call to PSTN. I think , I should use FXO adopter......

I would like to use X-Lite from one computer and it passed second computer (SIP Server) and PBX Software of SIP Server automatically dial the PSTN no like 0013068876654 and X-Lite get the response....

Best regards for all

janP · Post by **janP** » Tue Jan 15, 2008 1:04 pm

For calling to PSTN, you can use an ITSP too...

abdullahkhan · Post by **abdullahkhan** » Wed Jan 16, 2008 4:21 am

janP wrote:For calling to PSTN, you can use an ITSP too...

If I need Internet Telephony Service Provider, then what is mean by BSS. I already set SIP Server, so have a complete VOIP, now If I will install FXO/FXS it will connect PSTN. But I need help in selection Switch/ PCI i.e CAHTA Boards - PCI version or any other that is best for connection to PSTN.

Mohney · Post by **Mohney** » Wed Jan 16, 2008 11:38 am

Some gateways are listed here.
http://www.brekeke.com/support/support_ ... ateway.php