No response to REGISTER

jhearty · Post by **jhearty** » Wed Oct 10, 2007 1:28 pm

1. Brekeke Product Name and version:Brekeke SIP Server 2.0.7.2/217

2. Java version:1.5.0_06

3. OS type and the version:Windows XP 5.1

4. UA (phone), gateway or other hardware/software involved:Cisco ATA186

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :Pattern 1

6. Your problem: Setup server on a machine and never saw any response to Register request. Tore that down and setup server on a different machine. It registered OK first time, but after physically disconnecting and reconnecting that server from the LAN, same problem occured, no response to REGISTER messages. I am a newbie to Brekeke but an expert at SIP. Server is on a PC with static address 192.168.1.198, class C subnet, ATA is static at 192.168.1.201. Used Wireshark on same machine Brekeke SIP Server is on and saw REGISTER requests going to 192.168.1.198 port 5060. Server status shows active and listening on port 5060 address 192.168.1.198. Tried configuring both auto interface discovery and static address with discovery turned off.