Interoperability Information

[Alessandro]

1. Brekeke Product Name and version:Sip Server Version 2.0.7.2

2. Java version: 1.5.0

3. OS type and the version:Windows XP

4. UA (phone), gateway or other hardware/software involved:Sip-Proxy<==>SessionBorderController<==>IP-PBX Alcatel

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

Hi All,

I would like to obtain an information regarding the functionality of Sip Server brekeke looking at our scenarious tests.
below you could find out a diagram of our test scenario :

SipProxy<==>SessionBorderConroller<===>IP-PBX(A)<==>UAs(A)
^
^
IP-PBX(B)<==>UAs(B)


Now both IP_PBX didn't perform registration and they will use the the session border controller as Sip External Gateway , to route all the intranet call from site A to B and viceversa .
SessionBorderController will forward this intranet call to SipServer then Brekeke must reply at the same session border controller that will reach the final destination A or B.
Is there any possibility to make a working configuration where no registration is performed from the IP-PBXs and UAs , forwarding all the request that come from one site to the other site ??.
Best Regards
Alessandro.