Brekeke SIP server support Skype?

[dr_gildim]

1. Brekeke Product Name and version:Brekeke SIP Server , Version 2.1.6.6

2. Java version:1.6.0_07

3. OS type and the version:Windows XP 5.1

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:hello
im new in this forum and i need help
my question:is it posible to transfer the call to skype ?
the client to call my acces number that conected to the brekeke SIP server and to transfer the call for Skype and skype to call the nr....?

[voipwell.com]

Hi,

Skype does not use SIP. Brekeke is a SIP server. There is no software interopability.

[dr_gildim]

who knows ITSP that provide unlimited call plans for many countries and to support many simulations calls in the saem time
i need it so bad...
i want to start my business of providing international calling for low rates pc2pc pc2phone phone2pc phone2phone
for this i need DID number with 20 chanells that will transfer the incoming calls to my (server-Brekeke SIP server) and computer that instaled in it the Brekeke SIP server that conected to the internet and billing software and firewall and the most important thing is the ITSP provider....
im right?
who can help me in making the plane for this business?

[Beenie]

dr_gildim,

Search "sip skype gateway" or "sip skype adapter"
You may find some products..
http://www.google.com/search?q=sip+skype+gateway
http://www.google.com/search?q=sip+skype+adapter

[KentC]

Hi,

Skype does not use SIP. Brekeke is a SIP server. There is no software interopability.

Actually, Skype DOES use SIP. You have to sign up in the business section for a Skype Manager Account [That account can be for family based but it's aim is toward businesses].

Check out:
www.skype.com/en/features/skype-manager/

From there, you make a sip profile.

I've been able to make Skype work outbound via Brekeke SIP Server from my softphone [Yes, BREKEKE SIP SERVER not PBX]

Still working on the inbound and DID aspect. That's tricky.

Thanks,
Kent C.

[KentC]

1. Brekeke Product Name and version:Brekeke SIP Server , Version 2.1.6.6

2. Java version:1.6.0_07

3. OS type and the version:Windows XP 5.1

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:hello
im new in this forum and i need help
my question:is it posible to transfer the call to skype ?
the client to call my acces number that conected to the brekeke SIP server and to transfer the call for Skype and skype to call the nr....?

Yes. You can use "THRU REGISTRATION".

Configuration > SIP tab > Thru Registration [on] TICK

You can do the following which has worked for me to gain outbound access. Here is the best dial plan tested that works well:

Matching Patterns
$request = ^INVITE
$registered = false
$outbound = true
To = sip:(.+)@

Deploy Patterns
$auth = false
To = sip:%1@sip.skype.com

Make sure to register the actual Brekeke Sip Server with the following from Skype Connect:

sip:99051000123456:SkypeSipAccountPasswd@sip.skype.com

All you have to do is register your sip profile from a phone to Brekeke Sip Server using the same credentials from your Skype account. Then call using the format [contact uri]: phonenumber@sip.skype.com

The call should now route from inside the server outbound to Skype service and call will complete.

Thanks,
Kent C.

[KentC]

Still working on the inbound and DID aspect. That's tricky.

Hello Brekeke Sip Server/Skype Users,



Here is the methods I have discovered work for Brekeke Sip Server [Not PBX] for Skype : INBOUND SKYPE DID-REDIRECT



Step One: Sign up for Ipkall.com *Use the following link below for instructions, but use your Brekeke Sip Server SIP:URI 425*******@Brekeke.Public.Ip.Addr *

freecallguider blogspot com/2012/01/free-skypein-33-how-to-add-ipkall-or_3204.html



Step Two: Forward your Skype DID to the IpKall.com 425 DID

Use the following link for instructions: [ support skype com/en/faq/FA10532/how-do-i-set-up-call-forwarding-for-members-in-skype-manager ]



Step Three: Build the dial-plan for the 425 DID in Brekeke Sip Server



Matching Patterns
$request=^INVITE
$addr=^66.54.140.46$
From=sip: (.+)@
To=sip:425*******@



Deploy Patterns
$rtp=true
$b2bua=true
To=sip:99051000******@LAN.IP.ADDR.HERE:5060



The deploy patterns in Brekeke Sip Server will be your extension to your registered soft/hard phone. From there the call will route from your Skype DID via IpKall into your network, and route it to the registered softphone using credentials for contact:uri : sip:99051000******* : pw @ brekeke.server.ip



Tested this and you may get the occasional 408, but this will infact work.



What helped me come to the conclusion this was the answer was from reading the following:

support skype com/en/faq/FA34431/where-can-i-get-downloadable-guides-for-skype-connect



Read those they will give you the big idea how to manipulate routing. I used the following from Skype Connect User's Guide



6.0 Creating a SIP Profile

Figured since the IP Authentication feature wasn't working well and Brekeke doesn't have a backwards Upper or Thru Registration that Skype integrates with from Skype Manager CP,

This is the easier alternative to use this with your Brekeke Sip Server.

Here is my other thread so this information is spread:
community skype com/t5/Skype-for-business/Skype-DID-re-direct-to-SIP-Proxy-Server/m-p/3694779#M5348

Thank you for the help,

Kent C.

[taitan]

They have a wiki topic.
http://wiki.brekeke.com/wiki/Skype

[KentC]

They have a wiki topic.
http://wiki.brekeke.com/wiki/Skype

HI Taitan,

Maybe my method they add to the Brekeke Wiki for "Brekeke Sip Server" since that's for "Brekeke PBX ARS" configuration.

Thanks,
Kent C.

[KentC]

Brekeke Users,

I have configured a better way to route outbound with Skype Connect SIP Profile! Use this instead of the other dial plan for OUTBOUND and your call will register with Skype and ring as a normal call flow should with Brekeke Sip Server!

TESTED : Cisco IP 7960 + Brekeke Sip Server V.3 CentOS 5.8

Matching Patterns
$request = ^REGISTER
$outbound = true
$registered = false
To = sip:(.+)@

Deploy Patterns
$auth = false
&net.sip.timeout.ringing = 60000
Contact = sip:%1@sip.skype.com:5060

This new rule when applied on Brekeke Sip Server will correctly use UPPER REGISTRATION if that's set to ON with 5060/sip.skype.com

Thanks,
Kent C.