Error messages in Error Log Page

lperezu · Post by **lperezu** » Mon Dec 23, 2013 8:26 am

1. Brekeke Product Name and Version:

2. Java version: 1.7.0_25

3. OS type and the version: Linux

4. UA (phone), gateway or other hardware/software involved:

5. Your problem:

What do you think is the cause of this error messages?

2013-12-23 10:17:00.066 192.168.195.205:5062 OPTIONS 404 No matched rules sip:192.168.145.40 sip:900000@192.168.145.40 sip:900000@192.168.145.40 VOP-Nano/1.5.3

2013-12-20 00:17:05.594 192.168.195.205:5062 SUBSCRIBE 407 Authorization failed sip:900000@192.168.145.40 sip:900000@192.168.145.40 sip:900000@192.168.145.40 VOP-Nano/1.5.3

hope · Post by **hope** » Mon Dec 23, 2013 10:25 am

For options, there is no dial plan rule at Brekeke software which can be applied to the requests and send options request to proper destination.

For subscribe, the authentication setting is set as "on" from admintool/configuration/sip page authentication section

when set this field off, dial plan rule is also needed to route the subscribe requests to proper destination which can handle these requests.

janP · Post by **janP** » Mon Dec 23, 2013 11:11 am

Use Brekeke SIP Server version 3.3.
These non-INVITE errors will not be shown in the log in the default.