Dial-Plan 404 on trace from Brekeke to Brekeke Sip Server

KentC · Post by **KentC** » Mon Apr 09, 2012 1:43 pm

1. Brekeke Product Name and version:
Brekeke SIP Server 2.4.8.6/286.3
2. Java version:
1.5.0_20
3. OS type and the version:
SunOS 5.10
4. UA (phone), gateway or other hardware/software involved:
Brekeke Sip Server to Brekeke Sip Server
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
Pattern 7
6. Your problem:

Issue resolved. It was carrier route that was messed up. My routing plan was fine.

Harold · Post by **Harold** » Mon Apr 09, 2012 2:15 pm

$time = [12345]$

It seems that the 2nd proxy accepts calls only if the timestamp is ending with 1-5.
Otherwise 404 will be returned.

Remove "$time = [12345]$" and try again.

KentC · Post by **KentC** » Mon Apr 09, 2012 5:36 pm

Issue resolved. Thanks for your support.

Harold · Post by **Harold** » Tue Apr 10, 2012 12:03 pm

If you remove "To=sip:(5934.......|5934.....[3-4].)@" from both rule-1 and rule-2 at the 2nd proxy, what happens?