R5 to Cisco CM, SIP error 503

bcrocker · Post by **bcrocker** » Tue Feb 28, 2012 12:22 pm

1. Brekeke Product Name and version:

SIP Server

2. Java version:

6 update 31

3. OS type and the version:

Server 2008

4. UA (phone), gateway or other hardware/software involved:

Cisco CM

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

Calls not reaching handsets, getting error 503 "service unavailable".

Typical dial plan as referenced in rauland_cisco_20111102.text

Matching
$request=^INVITE
to=sip:(.+)@

Deploy
to=sip:%1@CM_IP

Calls go through with an xlite and 2 way audio is established. but every call to a cisco handset fails with a "503".

According to the facility (wireshark) the call is failing when the CM is trying to communicate SIP to the Brekeke.
Need some help PLEASE!

hope · Post by **hope** » Tue Feb 28, 2012 1:09 pm

the 503 should be sent by Cisco side
check if there is any setting at cisco side to accept call from Brekeke SIP server IP