Check the user name and password.
Or disable INVITE-Authentication at the SIP Server.
PAP2T Inbound OK, Register OK, Outbound FAILS
Moderator: Brekeke Support Team
-
- Posts: 12
- Joined: Wed Feb 09, 2011 2:01 pm
- Location: Montreal
is "Auth-user=user in "From:" set as yes at sip server/configuration/sip/authentication?
if so, the sip id in invite from header should be the same as authentication id which is set at sip server/user authentication.
you can try set "Auth-user=user in "From:" to no and restart sip server.
or create dial plan from pap2T to accept call from pap2 ip without checking authentication.
the dial plan is the same as that in http://wiki.brekeke.com/wiki/Security
if so, the sip id in invite from header should be the same as authentication id which is set at sip server/user authentication.
you can try set "Auth-user=user in "From:" to no and restart sip server.
or create dial plan from pap2T to accept call from pap2 ip without checking authentication.
the dial plan is the same as that in http://wiki.brekeke.com/wiki/Security
-
- Posts: 12
- Joined: Wed Feb 09, 2011 2:01 pm
- Location: Montreal
I did set "Auth-user=user in "From:" to NO, restarted the server, but didn't work.
In reality, the From is = to Auth-user...
Below is a the header of the second INVITE that the PAP2 sent to Brekeke and is denied:
Via: SIP/2.0/UDP 192.168.0.105:5060;branch=z9hG4bK-a3f0e2e0
From: 514-908-9742 <sip:10179100@sip.cirrus-telecom.ca>;tag=abde3fde92772c08o0
To: <sip:5144449955@sip.cirrus-telecom.ca>
Call-ID: 8d23f516-39ee3830@192.168.0.105
CSeq: 102 INVITE
Max-Forwards: 70
Proxy-Authorization: Digest username="10179100",realm="pbx1-mtl",nonce="95612608d19f5f482d0424766b1bb4263e4ff765",uri="sip:5144449955@sip.cirrus-telecom.ca",algorithm=MD5,response="651c3137076c3321e3632fb87ba775cf"
Contact: 514-908-9742 <sip:10179100@192.168.0.105:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 444
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp
And here is the header of the PAP2 REGISTER, that works fine:
Via: SIP/2.0/UDP 192.168.0.105:5060;branch=z9hG4bK-3d866f28
From: 514-908-9742 <sip:10179100@sip.cirrus-telecom.ca>;tag=6c7ad4bf582ecd4do0
To: 514-908-9742 <sip:10179100@sip.cirrus-telecom.ca>
Call-ID: 9d5d7a88-75eba10@192.168.0.105
CSeq: 18059 REGISTER
Max-Forwards: 70
Authorization: Digest username="10179100",realm="pbx1-mtl",nonce="004b9b0d239aa54d7b01a1b338abeb938a3e0fce",uri="sip:sip.cirrus-telecom.ca",algorithm=MD5,response="668e4c80a124365d710d1eaea398a787"
Contact: 514-908-9742 <sip:10179100@192.168.0.105:5060>;expires=60
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Any other ideas?
The same Brekeke account, if I use a soft-phone, works fine to make calls..
Thanks again.
In reality, the From is = to Auth-user...
Below is a the header of the second INVITE that the PAP2 sent to Brekeke and is denied:
Via: SIP/2.0/UDP 192.168.0.105:5060;branch=z9hG4bK-a3f0e2e0
From: 514-908-9742 <sip:10179100@sip.cirrus-telecom.ca>;tag=abde3fde92772c08o0
To: <sip:5144449955@sip.cirrus-telecom.ca>
Call-ID: 8d23f516-39ee3830@192.168.0.105
CSeq: 102 INVITE
Max-Forwards: 70
Proxy-Authorization: Digest username="10179100",realm="pbx1-mtl",nonce="95612608d19f5f482d0424766b1bb4263e4ff765",uri="sip:5144449955@sip.cirrus-telecom.ca",algorithm=MD5,response="651c3137076c3321e3632fb87ba775cf"
Contact: 514-908-9742 <sip:10179100@192.168.0.105:5060>
Expires: 240
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 444
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Content-Type: application/sdp
And here is the header of the PAP2 REGISTER, that works fine:
Via: SIP/2.0/UDP 192.168.0.105:5060;branch=z9hG4bK-3d866f28
From: 514-908-9742 <sip:10179100@sip.cirrus-telecom.ca>;tag=6c7ad4bf582ecd4do0
To: 514-908-9742 <sip:10179100@sip.cirrus-telecom.ca>
Call-ID: 9d5d7a88-75eba10@192.168.0.105
CSeq: 18059 REGISTER
Max-Forwards: 70
Authorization: Digest username="10179100",realm="pbx1-mtl",nonce="004b9b0d239aa54d7b01a1b338abeb938a3e0fce",uri="sip:sip.cirrus-telecom.ca",algorithm=MD5,response="668e4c80a124365d710d1eaea398a787"
Contact: 514-908-9742 <sip:10179100@192.168.0.105:5060>;expires=60
User-Agent: Linksys/PAP2T-3.1.15(LS)
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER
Supported: x-sipura
Any other ideas?
The same Brekeke account, if I use a soft-phone, works fine to make calls..
Thanks again.
-
- Posts: 12
- Joined: Wed Feb 09, 2011 2:01 pm
- Location: Montreal