help write the ARS and dial plan.

n2a1ce · Post by **n2a1ce** » Wed Jan 05, 2011 8:32 am

1. Brekeke Product Name and version: 2.4.7.3

2. Java version: 6. 22

3. OS type and the version: ubuntu 10.04

4. UA (phone), gateway or other hardware/software involved:
audiocodes mp118

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem: Hello, Hope!
I have a problem, please help! I need to connect the SIP Trunk! I can not prescribe the correct ars and dial plan for them.

ip internal PBX 192.168.3.165
honest ip 212.90.189.112
ip address 62.221.34.22 ISP
number of internal SIP-phone 450
SIP-a number that gives the provider for the superconducting / outgoing calls 380442245553

Tell me right there in my ARS?
and what these ars I have to have dial plan's?

n2a1ce · Post by **n2a1ce** » Wed Jan 05, 2011 8:33 am

Code: Select all

 [URL=http://img148.imageshack.us/i/91872401.png/][IMG]http://img148.imageshack.us/img148/9485/91872401.th.png[/IMG][/URL]

[URL=http://img218.imageshack.us/i/11712662.png/][IMG]http://img218.imageshack.us/img218/7100/11712662.th.png[/IMG][/URL]

hope · Post by **hope** » Thu Jan 06, 2011 6:16 pm

do you have the dial plan "To PBX From ITSP" ?
if yes, you donot need any other dial plan.
when setup ars, can you see number "380442245553" at sip server/register clients list?

is there any problem when making / receiving calls from this itsp?
if yes, what sip response can you see from captured packets on the pbx server pc?
use wireshark to capture packets

n2a1ce · Post by **n2a1ce** » Mon Jan 10, 2011 7:45 am

thanks, but I have a problem with 30 - 32 cliff. in a call status Accepted. and must be talking.

hope · Post by **hope** » Mon Jan 10, 2011 11:00 am

"call status Accepted" it happens when brekeke didnot receive ACK from caller side.
capture the call on brekeke server, and check if it is the cause.
if possible, also check at caller side, if the 200 ok is received by caller
and what dial plans are you using for the call?