Help link brekeke PBX with audiocodes mp118

n2a1ce · Post by **n2a1ce** » Mon Dec 06, 2010 8:13 am

1. Brekeke Product Name and version: 2.4.7.3

2. Java version: 6. 22

3. OS type and the version: ubuntu 10.04

4. UA (phone), gateway or other hardware/software involved:
audiocodes mp118

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:

Hi, everyone, Hi Hope. Please help adjust incoming calls to my brekeke through audio codes mp118 <- gsm gateway. I can not understand that I have not correctly configured, the gateway or brekeke (ARS).

difficult, if not, please describe (A specific example) that should be spelled out at the gateway to fxo ports, and (concrete) for incoming ARS brekeke. Thanks in advance.
PS. sorry for my English.

hope · Post by **hope** » Mon Dec 06, 2010 10:51 am

have you check brekeke wiki about gateway setup?
http://wiki.brekeke.com/wiki/AudioCodes-MP-114
what error response when making call between audiocodes and brekeke?
http://wiki.brekeke.com/wiki/Capture-Packets-Wireshark

n2a1ce · Post by **n2a1ce** » Tue Dec 07, 2010 4:19 am

> have you check brekeke wiki about gateway setup?
Yes, I did set up

> what error response when making call between audiocodes and brekeke?

I do not know

hope, can you make ars for me, for incoming call??
Thanks in advance.

hope · Post by **hope** » Tue Dec 07, 2010 1:08 pm

ARS Pattern - IN
------------------------------------------
[Matching Patterns]
From:sip:(.+)@gw_IP
To: sip:(.+)@

[Deploy Patterns]
To: PBX_user
-------------------------------------------

ARS pattern-out is same as gateway wiki post

maybe also need dial plan
------------------------------------------
[Matching Patterns]
$request = ^INVITE
$addr = gw_IP
To = sip:(.+)@

[Deploy Patterns]
$auth = false
To = sip:%1@127.0.0.1:15060
-------------------------------------------

n2a1ce · Post by **n2a1ce** » Wed Dec 08, 2010 12:47 am

Thank's, but don't calling. My Dial Plan:

Matching Patterns
$request=^INVITE
$addr=192.168.1.10 (IP my AudioCodes)
To=sip:(.+)@

Deploy Patterns
$auth=false
To=sip:%1@127.0.0.1:15060

My ARS

IN - 1 Matching patterns
from sip:(.+)@192.168.1.10 (IP my AudioCodes)
to sip:(.+)@ (all sip's ?!)

Deploy patterns

To 1021 (number of my private (registered) phone)

OUT - 1 Matching patterns

to sip:(093.+)@
User ^.+$

Deploy patterns

From sip:1021@192.168.1.3
To sip:004$1*@192.168.1.10:5060

Help me!!! Please!

hope · Post by **hope** » Wed Dec 08, 2010 10:38 am

IN - 1 Matching patterns
from: nothing set here
to sip:(.+)@ (all sip's ?!)

Deploy patterns
To 1021 (number of my private (registered) phone)

- is there pbx user created for 1021?
- try by removing setting in matching from just for testing
this setting will route all calls to ext 1021

it is better to use wireshark captured the packets and check From header sent from audiocodes

ARS OUT - 1 Matching patterns

to sip:(093.+)@
User ^.+$

Deploy patterns

From sip:1021@192.168.1.3
To sip:004$1@192.168.1.10

no * after 004$1
can you call from phone to audiocodes by the ars pattern-out?
with above ars out, if dial 0931111 then brekeke dial to audiocodes with number 0040931111, is it correct?

n2a1ce · Post by **n2a1ce** » Tue Dec 14, 2010 6:19 am

thanks, it work! in my audiocodes don't wright namber on "automatic dialing" for fxo.

Hope, thanks!!!