Brekeke PBX Trunk to Brekeke PBX

chantasaro · Post by **chantasaro** » Thu Mar 25, 2010 3:12 am

1. Brekeke Product Name and version:2.4.3.9

2. Java version:

3. OS type and the version: Windows 2003

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
How to connect between Brekeke PBX to Brekeke PBX for client can call from PBX1 to PBX2

hope · Post by **hope** » Thu Mar 25, 2010 2:23 pm

for user at pbx1 call to pbx2
at pbx1 use ARS to register pbx1 as a user to pbx2 and create pattern-out to send call to pbx2 ip address if dialing numbers a certain prefix or pattern
for setup ars on pbx 1, copy the sample ARS rule for ITSP at pbx/ARS/settings

and do the same setup at pbx2 for calls from pbx2 users to pbx1

chantasaro · Post by **chantasaro** » Mon Mar 29, 2010 10:43 pm

I try to configure but not work.

Step 1 ==> In PBX2 Create SIP Account for PBX1.
Step 2 ==> In PBX1 Create ARP to register PBX2.
Step 3 ==> Creat pattern-out to send call to PBX2.

hope · Post by **hope** » Tue Mar 30, 2010 10:50 am

can you see pbx1 register record at pbx2/sip server/registered clients?

at pbx2, create pbx user with the same name as pbx1 regisetered id
at pbx1/ ars/pattern-out, set
pattern-out add the following setting
matching pattern
From: sip:pbx1_registerID@pbx2_IP

if not work, please capture packets and pbx1 or pbx2
and check what response from pbx2