Cisco 7940 configuration

booshanrao · Post by **booshanrao** » Thu Jan 21, 2010 1:59 am

1. Brekeke Product Name and version:Brekeke PBX, Version 2.4.3.0

2. Java version:

3. OS type and the version:windows 2003 server

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:Even configured all user details in CISCO 7940 it is not registering.Can any one helps me out with configuration.

hope · Post by **hope** » Thu Jan 21, 2010 4:06 pm

is the authentication for REGISTER and INVITE set on at pbx/sip server/configuration/sip
if yes, check the setting at step 3, 4 and 5 for configuration at sip server and phone side at link below
http://www.brekeke.com/products/product ... simple.php

after phone register successfully, you need to create users at pbx/users for each phone, pbx user name is the same as phone ID.

booshanrao · Post by **booshanrao** » Fri Jan 22, 2010 8:37 pm

Hi Brekeke Guru,
As i added in the forum, not registering with cisco 7940.
Now tried with configuring back up proxy server then it started working.
Thank you,
Regards,
Shashi