Port not ready. Check firewall settings

Nelly503 · Post by **Nelly503** » Tue Nov 24, 2009 3:24 pm

1. Brekeke Product Name and version:
Brekeke SIP Server, 2.1.6.6/239

2. Java version:1.6.0_06

3. OS type and the version:Windows 2003, 5.2

4. UA (phone), gateway or other hardware/software involved: xlite softphones

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 1

6. Your problem: xlite softphones will not register after installing new Cisco ASA 5510, receive error on brekeke "Port not ready. Check firewall settings and conflicting applications, then restart machine." Re-installed old software based firewall and clients can register without any problems. Everything is internal, does the Brekeke license service reqire a outbound connection?

hope · Post by **hope** » Wed Nov 25, 2009 12:00 pm

http://wiki.brekeke.com/wiki/Error--Port-Not-Ready
http://wiki.brekeke.com/wiki/Error-Fail ... SIP-Server

Nelly503 · Post by **Nelly503** » Wed Nov 25, 2009 12:10 pm

Thanks for the response. I did find this prior to posting my question. The AV is disabled and no firewall is enabled on the server. Does the Brekeke need outbound connectivity for verifying license?

hope · Post by **hope** » Wed Nov 25, 2009 12:54 pm

license activation can be done with or without internet
http://wiki.brekeke.com/wiki/Activating ... -Admintool
http://wiki.brekeke.com/wiki/bss-activa ... t-internet

achooi · Post by **achooi** » Wed Jan 20, 2010 2:10 pm

I had the same problem. If you followed this guide: http://wiki.brekeke.com/wiki/Error-Fail ... SIP-Server ; and it is still not working for you, make sure its not a networking issue. Make sure your NIC is configured correctly. If you have two installed, just unplug the cable on the LAN side and see if BSS starts without the error.