486 returned on all calls

Discuss any topic about Brekeke PBX.

Moderator: Brekeke Support Team

Post Reply
ka2qhg
Posts: 34
Joined: Tue Nov 21, 2006 10:33 am

486 returned on all calls

Post by ka2qhg »

1. Brekeke Product Name and version:
Brekeke PBX, Version 2.0.7.2 Pro Evaluation
ID: 00000000 , Users: 10 , Concurrent: 10

2. Java version:
1.5 update 14
3. OS type and the version:
Windows 2003 server with SP2

4. UA (phone), gateway or other hardware/software involved:
Callcentric , Linksys pap2

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 9

Your problem:

I have a test setup for Brekeke PBX, Version 2.0.7.2 Pro Evaluation It shows my pap2 as registered as ex1001,1002 and it also shows that my PBX is registered to Callcentric.

When I try to make a call, it rings one or two times and then returns busy (486). It doesn't make any difference if I change the sip configuration. I have tried the pap2 on another Brekeke Sip server and the unit works fine.
Larry
hope
Posts: 862
Joined: Tue Jan 15, 2008 4:08 pm

Post by hope »

did the brekeke PBX register to Callcentric by ARS?
who returned 486 busy
did linksys pap2 register to Brekeke pbx? is there any pbx user created for each linksys number?
Laurie
Posts: 245
Joined: Mon Jan 07, 2008 12:25 pm

Post by Laurie »

Larry,

Can you make a call between 1001 and 1002?
ka2qhg
Posts: 34
Joined: Tue Nov 21, 2006 10:33 am

Post by ka2qhg »

Both pap2 are registered to the Brekeke PBX. The Brekeke PBX is registered to Callcentric by ARS. I am unable to complete any calls. The call logs show 486 no matter what number I call. I have tried upper registration both on and off. The same with thru registration.
Larry
hope
Posts: 862
Joined: Tue Jan 15, 2008 4:08 pm

Post by hope »

i think you can call between pap2?
set upper registration off
use ARS pattern-in to accept call from Callcentric to pbx extension, like
pattern-IN
[Matching patterns]
To: sip:the_number_pbx_register_to_Callcentric@

[Deploy patterns]
To: pbx_extension(such as 1001,1002)

use ARS pattern-out to send call to Callcentric, like
pattern-OUT
[Matching patterns]
To: sip:9(.+)@

[Deploy patterns]
To:sip:$1@Callcentric_IP

the calls with prefix 9 will be sent to Callcentric
ka2qhg
Posts: 34
Joined: Tue Nov 21, 2006 10:33 am

Post by ka2qhg »

I am now able to make calls from one pap2 to another. I had six extensions registred and they all are working.

I still have a problem with incoming calls from Callcentric, but outgoing calls are now working. I have a work around that I can use to route calls from my Callcentric DIDs to fixed extensions.

I think I can solve the rest of the problem, thank you again for all your help.
Larry
Post Reply