1. Brekeke Product Name and version:Brekeke PBX 2.3.7.4 PRO
2. Java version:Latest
3. OS type and the version:Linux Redhat
4. UA (phone), gateway or other hardware/software involved:
SIPURA SPA2100 3.3.9
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
6. Your problem: I guess the PBX doesn't recognize t.38. I reviewed the forum and didn't see much that would help in my case. I am using the sip server in the PBX to send the fax calls out but cannot get the inbound calls to work with my ITSP through the sip server. I am using g.711u for the codec.
Outbound I use:
Matching Pattern
$request=^INVITE
$registered=false
To=sip:([0-9]{11})@
Deploy:
To=sip:%1@ITSP IP Address
Inbound:
$request=^INVITE
To=sip:+13865xx5xxxx phone number dialed through ITSP
Deploy:
To=3865xx5xxxx
I may also be missing something in the matching and deploy fields to ensure that fax works.
Any help would be appreciated.
FAX Calls
Moderator: Brekeke Support Team
http://wiki.brekeke.com/wiki/FAX-Support
$request=^INVITE
To=sip:\+13865xx5xxxx@
Deploy:
To=sip:3865xx5xxxx@
is it like?Inbound:
$request=^INVITE
To=sip:+13865xx5xxxx phone number dialed through ITSP
Deploy:
To=3865xx5xxxx
$request=^INVITE
To=sip:\+13865xx5xxxx@
Deploy:
To=sip:3865xx5xxxx@
FAX
Hope:
I tried that and it didn't work either. I set up the same number in the PBX and the INcoming call works fine. I did register the PBX ARS with the ITSP but I don't know how to program the SIP server for registration. I tried several combination's. The calls from my ITSP are coming in from a specific IP address and is point to my specific IP address. They ship 11 digits.
AGCUSA
I tried that and it didn't work either. I set up the same number in the PBX and the INcoming call works fine. I did register the PBX ARS with the ITSP but I don't know how to program the SIP server for registration. I tried several combination's. The calls from my ITSP are coming in from a specific IP address and is point to my specific IP address. They ship 11 digits.
AGCUSA