Wrong IP in SDP incase of multiple NIC

vinodh_nair · Post by **vinodh_nair** » Tue Jun 23, 2009 3:20 am

1. Brekeke Product Name and version:Brekeke SIP Server , Version 2.2.6.2 Standard

2. Java version:

3. OS type and the version:windows 2003 standard R2

4. UA (phone), gateway or other hardware/software involved:Dialogic & Cisco phone

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :1)
All phones and PBX/SIP Server are in the same LAN

6. Your problem: We have two NIC in the sip server machine one is primary and one is backup. Both the NIC are in different subnet.Wrong IP is sent in the SDP when backup NIC is enabled and then start the SIP Server but When i disable Backup NIC and restart the server the SDP is going correctly with correct IP in it. This makes cisco phone sends the rtp to wrong IP on which application is not listening.Is there a way i can specify the SIP Server IP

janP · Post by **janP** » Tue Jun 23, 2009 3:29 pm

Set the following at [Configuration]-[Advanced] page.

net.net1.interface-restrict = Backup NIC's IP address

And restart the server.

vinodh_nair · Post by **vinodh_nair** » Wed Jun 24, 2009 12:35 am

Thanks mate,it worked.

janP · Post by **janP** » Wed Jun 24, 2009 11:12 am

Wow.