Inbound Voip numbers from TTNC UK

Mak · Post by **Mak** » Sat Feb 07, 2009 5:57 am

1. Brekeke Product Name and version: 2.2.6.2/276

2. Java version: 1.6.0_11

3. OS type and the version: Linux 2.6.18-92.1.13.el5.028stab059.3

4. UA (phone), gateway or other hardware/software involved: HT 486, XLite & Quintum DX2060

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : Pattern 5

6. Your problem: Thanks to the forum I have been able to make a successful call from HT 486 to Xlite both on same network.
But the problem I would appreciate your help is that we have UK inbound Voip numbers from TTNC (02089591000-50) which has been diverted to a sip address which is the same address as the BSS ;

BSS IP address = 78.129.222.40
sip.digi.co.uk IP address = 78.129.222.40

e.g
02089591000@sip.digi.co.uk

What dial plan shall I use to call and accept calls to the above number.

Thanks to the forum I have also used the below dial plan to send external calls to the Quintum:

Mathing patterns

$request=^invite
To=sip:9(.+)@

Deploy patterns

To=sip:%1@78.129.222.45

Is there any other dialplan I would need ?

Many Thanks for your assistance
Mak

taitan · Post by **taitan** » Sat Feb 07, 2009 8:54 pm

Mak,

>> 02089591000@sip.digi.co.uk

Do you want to make a call to this number?
Or.. do you want to accept a call from this number?

Is it a phone number for a registered SIP client?

Mak · Post by **Mak** » Sun Feb 08, 2009 3:25 am

Hi Taitan,

Thanks for the response.

Yes I would like to accept a call and make a call to and from this number. Ideally calls to other registered clients would be accepted all the tme and calls to non registered clients would be sent to the Quintum IP address.

And yes this is a phone number for a registered client.

Cheers

Mak

taitan · Post by **taitan** » Mon Feb 09, 2009 1:58 pm

Since a client is registered , you don't have to create a dialplan.. I think.

Is your call rejected currently?

Is "78.129.222.45" a HT 486 ?

Mak · Post by **Mak** » Wed Feb 11, 2009 7:14 am

Hi Taitan,

Yes the call is rejected currecntly I get the bellow error "Carrier has not accepted the call "

78.129.222.45 is the IP address of Quintum which would handle all offnet calls when the user dials 9 first.

Many Thanks for your assistance.

Mak

taitan · Post by **taitan** » Wed Feb 11, 2009 7:32 pm

>>Yes the call is rejected currecntly I get the bellow error "Carrier has not accepted the call "

Do you know what kind of SIP response code is it?
Can you paste the response packet here?

If you make a call from alternative SIP client such as X-Lite, does the same issue happen?

Mak · Post by **Mak** » Thu Feb 12, 2009 4:50 am

No mate, I dont know the Sip response code .....

You know The Novero platform from TTNC is very similar control panel to the Voxbone's control panel......

I gather I would need a dialplan to aknowledge/accept SIP request from 02089591000@sip.digi.co.uk and then pass the call to the registered user agent (02089591000@192.168.2.4....)

taitan · Post by **taitan** » Thu Feb 12, 2009 11:41 am

Well Mak,,

>> call to the registered user agen (02089591000@192.168.2.4....)

If you dial this number from XLite, does the 02089591000 ring?

In your dialplan..
"$request=^invite" should be "$request=^INVITE".

Mak · Post by **Mak** » Fri Feb 20, 2009 10:21 am

Sorry for the delay in responding, been away

)

Well the call goes through but it doesnt ring, but when my mate picks it up its fine and we could could talk clearly...

taitan · Post by **taitan** » Mon Feb 23, 2009 7:32 pm

>> Well the call goes through but it doesnt ring, but when my mate picks it up its fine and we could could talk clearly...

You can make a call to your mate even if the phone doesn't ring.. right?

While you are ringing to your mate, what kind of [Status] can you see in the [Active Sessions] page?

Also.. check the phone's settings or speaker... "ring" might be disabled..