Talking Lenght

damatta · Post by **damatta** » Sat Jan 17, 2009 10:43 am

1. Brekeke Product Name and version: Brekeke PBX Pro ver 2.2.5.8

2. Java version: 1.5.0_14

3. OS type and the version: Windows 2003 5.2

4. UA (phone), gateway or other hardware/software involved: Grandstrem BT-200

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 9

6. Your problem: Would like to create an ARS (not a Dial Plan) where call's talking lenght would be limited to 60 sec. Any help deeply appreciated.

hope · Post by **hope** » Mon Jan 19, 2009 6:15 pm

PAL can monitoring user phone calls and you can disconnect call manually by using PAL

semensato · Post by **semensato** » Sun Feb 08, 2009 7:18 pm

Hey! I Tried to use this line (&net.sip.timeout.talking=60000) on Deploy Patterns of a Dial Plan but it doesn't work out...

janP · Post by **janP** » Mon Feb 09, 2009 3:40 pm

Are you sure your DialPlan rule is matched?
Place your rule in the top of the rule lists.

semensato · Post by **semensato** » Mon Feb 09, 2009 4:34 pm

Here is the Dial Plan used:

<Matching Patterns>

$request=^INVITE
To=sip:(.+)@

<Deploy Patterns>

&net.sip.timeout.talking=60000
To=sip:%1@sip.proxy.net
$auth=off

janP · Post by **janP** » Mon Feb 09, 2009 7:59 pm

is it the top priority (Priority=1) ?
can you see your DialPlan rule name in [Rule] field of Session Details?
If not, your DialPlan rule is not matched..

semensato · Post by **semensato** » Mon Feb 09, 2009 8:59 pm

It is not on top priority but I do can see DialPlan rule name in [Rule] field of Session Details.

janP · Post by **janP** » Tue Feb 10, 2009 1:06 pm

I suppose your client does Session-Timer.. so please disable Session-Timer at the client.

If it is impossible, use setScheduleTerminate() in the plug-in.
http://www.brekeke-sip.com/download/bss ... gin_en.txt

semensato · Post by **semensato** » Tue Feb 10, 2009 1:52 pm

It was already disabled.

janP · Post by **janP** » Tue Feb 10, 2009 3:32 pm

Capture packets and see what happens.