how to setup dial plan and make a good call

powell · Post by **powell** » Thu Sep 11, 2008 11:15 am

1. Brekeke Product Name and version:
server-product Brekeke SIP Server
server-ver 2.1.6.6/239
2. Java version:
1.6.0_07
3. OS type and the version:
Windows 2003
4. UA (phone), gateway or other hardware/software involved:
eyebeam and mvts3.1.3
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
i have no idea to make the dial plan to complete call. (eyebeam already register to SIPserver) and make a call.
eyebeam -----> brekek ----------->mvts

hope · Post by **hope** » Fri Sep 12, 2008 9:57 am

there is dial plan tutorial
http://www.brekeke-sip.com/download/bss ... lan_en.pdf

janP · Post by **janP** » Fri Sep 12, 2008 10:34 am

What is "mvts"?
Can it register in Brekeke? If so, you don't have to make a DialPlan.
Otherwise you need a DialPlan.

powell · Post by **powell** » Fri Sep 12, 2008 11:21 am

mvts is softsiwthc like SIPserver

lakeview · Post by **lakeview** » Mon Sep 15, 2008 10:40 am

The DialPlan will be...

==============================
[Matching Patterns]
$request = ^INVITE
To = sip:9(.+)@

[Deploy Patterns]
To = sip:%1@mvts's_IP_address
==============================

If a call has a prefix "9", the call will be forwarded to mvts.

powell · Post by **powell** » Mon Sep 15, 2008 1:28 pm

thanks, one more issue, how to set DTMF mode in SIP server?