Brekeke with a Grandstream GXP 2000

Cowpoke · Post by **Cowpoke** » Mon Aug 11, 2008 5:16 pm

1. Brekeke Product Name and version:
SIP-Server 2.1.6.6

2. Java version:
1.5.0_06

3. OS type and the version:
Windows XP (SP2)

4. UA (phone), gateway or other hardware/software involved:
Grandstream GXP2000

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :
1 (Everything within LAN)

6. Your problem:
The Grandstream does not register with the SIP server.

I followed the Quickstart Guide, and re-traced my steps a few times -- success is eluding me.

I want to call from computer (x-lite) to UA (GXP 2000); x-lite is showing up as registered client, GXP 2000, again, is not.

taitan · Post by **taitan** » Tue Aug 12, 2008 12:08 am

you need to check the phone's username and password.

Cowpoke · Post by **Cowpoke** » Tue Aug 12, 2008 7:05 pm

Username and password both check out fine...

I can't figure this one out!

Is there a certain version of .Net I should be using?

Beenie · Post by **Beenie** » Wed Aug 13, 2008 12:05 am

Hi Cowpoke,

If you don't use the authentication at the SIP Server, can GXP 2000 make a register?

Thanks
Beenie

Cowpoke · Post by **Cowpoke** » Fri Aug 15, 2008 1:38 pm

The GXP2000 is configured - it works with my current VoIP provider. I am trying to configure an in-house network. I used the QuickStart guide - thinking it'd be a snap... ho hum...

I am on the verge of throwing in the towel on this!

Cowpoke

Haddas · Post by **Haddas** » Fri Aug 15, 2008 2:26 pm

Can you send a ping from the server PC to the GXP 2000?
Are you using a firewall on the server PC?

Cowpoke · Post by **Cowpoke** » Sat Aug 16, 2008 11:47 am

I can reach the GXP2K from the server PC. (That's how I generally configure it.) They are joined together at the same router. Pinging works fine too... I turned off all my anti-virus/firewalls (to eliminate them as causes).

My suspicion is that the problem is with the GXP2K configuration -- something is not set correctly.

Can I post my phone config to this board? Perhaps you (someone) can review the config and identify what is incorrect in short order...?

Thanks!
Cowpoke

james · Post by **james** » Sat Aug 16, 2008 7:36 pm

Hi Cowpoke,

My company is using several GXP2000 phones and they are working well.

Paste your phone's settings here. I can check it out.
also, let me know the firmware's version.