Forwording & FXO port line issues..!! :idea:

[Niggy]

1. Brekeke Product Name and version:2 1 6 6

2. Java version:5

3. OS type and the version:win server 2003

4. UA (phone), gateway or other hardware/software involved: Grandstream GXW 4104 4 ports, X-lite softphone

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :2

6. Your problem:
hi all,
I have an Ext 111 all incoming calls to this Ext shuld be forworded to a moblie # if there is no answer for 3 or 4 rings. How would I set this up?

My FXO gateway is connected to 2 pstn lines, how could I specified the FXO port line for incoming calls & outgoing calls , for example line A for incoming & line B for outgoing??

thanks alot...

[hope]

I have an Ext 111 all incoming calls to this Ext shuld be forworded to a moblie # if there is no answer for 3 or 4 rings. How would I set this up?

at ext 111 user edit page, set the mobile # at "Forwarding destination (No answer)". and set a prefix before the mobile # to use an ARS rule to dial out

[Niggy]

hi hope,
ok now i can forword calls to mobile #, thanks .

how about specifing the FXO line to call out through, any ideas??

thanks in advance..

[hope]

My FXO gateway is connected to 2 pstn lines, how could I specified the FXO port line for incoming calls & outgoing calls , for example line A for incoming & line B for outgoing??

two-stage dialing, dial the outgoing FXO number before destination
set pbx user only for FXO port for incoming calls