407 Proxy Authentication Required

hbravo · Post by **hbravo** » Thu Apr 17, 2008 7:50 pm

1. Brekeke Product Name and version: SIP Server 2.2 alpha

3. OS type and the version: windows xp

4. UA (phone), gateway or other hardware/software involved: trixbox, xlite

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

All phones and PBX/SIP Server are in the same LAN.

6. Your problem:
I'm trying to communicate OCS Speech Server 2007 to make outbound calls through a Trixbox IP PBX Server, using Brekeke SIP Proxy in the middle to convert sip over tcp to udp. But I always get 407 Proxy authentication required. Authentication is off.

Dial Plan:
$request=INVITE
To=(.+)

Deploy pattern
$target=trixbox_ip
To=%1

james · Post by **james** » Thu Apr 17, 2008 9:54 pm

Did you disable Authentication at both Brekeke SIP Server and trixbox?

hbravo · Post by **hbravo** » Fri Apr 18, 2008 6:59 pm

Yes I did. Authentication is disabled in Brekeke, but not in Trixbox.

james · Post by **james** » Mon Apr 21, 2008 10:48 am

Can you disable the Authentication in Trixbox too?
If not, you need to set the correct user password in the client.

hbravo · Post by **hbravo** » Mon Apr 21, 2008 1:44 pm

Do you know how to disable authentication in Asterisk/Trixbox?

james · Post by **james** » Mon Apr 21, 2008 9:27 pm

Hector ,

I don't know about Asterisk/Trixbox.
You can use Brekeke PBX instead of Asterisk...