PSTN Call Using VoIP GW

vikkosung · Post by **vikkosung** » Mon Dec 03, 2007 1:05 am

1. Brekeke Product Name and version: 2.0.7.2 Pro

2. Java version: 1.6.0_01

3. OS type and the version: Vista

4. UA (phone), gateway or other hardware/software involved: CISCO3640 (2 x FXO)

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html :

6. Your problem:
Unsuccessful registering of CISCO3640 in ARS;
I got error "405 Method Not Allowed"; I put "sip:1234@172.16.66.249" in URI field and "172.16.66.240" in Proxy Address field where .249 is CISCO3640 and .240 is Brekeke SIP server. Is that correct?

slaider · Post by **slaider** » Wed Dec 19, 2007 2:16 pm

Release IOS cisco ??

print sh run configuration.

Bye
Slaider

voipwell.com · Post by **voipwell.com** » Wed Dec 19, 2007 5:01 pm

Hi,

Are you trying to register the cisco to the brekeke or the brekeke to the cisco. If you are trying to register the cisco to the brekeke you don't use ars to do it. If you are trying to register the brekeke to the cisco then use the cisco ip address for both the url and proxy. Also, I wouldn't use java 1.6.

lakeview · Post by **lakeview** » Thu Dec 20, 2007 1:38 pm

Try disabling Session-Timer and 100rel at the ARS.
Because CISCO3640 may not support them.