help, Make outgoing calls

ancuser · Post by **ancuser** » Wed Jun 13, 2007 10:06 am

1. Brekeke Product Name and version:2.0.7.2

2. Java version: 1.5.0

3. OS type and the version: Windows XP Professional SP2

4. UA (phone), gateway or other hardware/software involved: Mediatrix 1202 FXO

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/ ... terns.html : 4

6. Your problem: Make outgoing calls.

Hi all, my problem is the follow, i have a mediatrix fxo 1202 with 4 ports, the mediatrix is working with incomming calls, if i make a call to my pstn "telmex line" and the call arrive well, but i dont know how can i configure the pbx for make a call from internal sip line to external pstn line...

for example to make a local call: 4810587

please help me!

job · Post by **job** » Fri Jun 15, 2007 2:45 am

You can use ARS. It is easy.

ancuser · Post by **ancuser** » Fri Jun 15, 2007 8:08 am

how, can you explain me plz?

for example i need to mark 9 for dial tone and 4810587 (my house phone).

my pbx ip=172.16.1.4
my gateway=172.16.1.25

what do i need?

ancuser · Post by **ancuser** » Fri Jun 15, 2007 10:22 am

i have configured this:

out:
matching patterns:
to=sip:9(.+)@

deploy patterns:
to=sip:$1@172.16.1.25:5060

but when i try to make a call from my SJPHONE to pstn line mark 94810587 (my house) buy the softphone is marking about 3 or 4 times but the call never continue... shows me "call rejected, 480 temporally unavailable", so the IN-USE led turn-on ....

is ARS good or can the gateway be with bad configuration?

help me plz...

do you know any webpage where i can see all ARS parameters like (* + % $ () {} [] .. etc)?

job · Post by **job** » Fri Jun 15, 2007 11:37 am

I think the problem comes from the gateway configuration.

michaelkoh · Post by **michaelkoh** » Wed Sep 26, 2007 6:53 pm

I am now experiencing the same problem...did you found any answer?

ancuser wrote:i have configured this:

out:
matching patterns:
to=sip:9(.+)@

deploy patterns:
to=sip:$1@172.16.1.25:5060

but when i try to make a call from my SJPHONE to pstn line mark 94810587 (my house) buy the softphone is marking about 3 or 4 times but the call never continue... shows me "call rejected, 480 temporally unavailable", so the IN-USE led turn-on ....

is ARS good or can the gateway be with bad configuration?

help me plz...

do you know any webpage where i can see all ARS parameters like (* + % $ () {} [] .. etc)?

peng · Post by **peng** » Sat Sep 29, 2007 6:41 pm

>> do you know any webpage where i can see all ARS parameters like (* + % $ () {} [] .. etc)?

http://java.sun.com/j2se/1.4.2/docs/api ... ttern.html

amr_elsawi · Post by **amr_elsawi** » Sun Nov 25, 2007 3:23 am

please try to make sure that your GW have the ability to be Trunking GW, to be able to send any calls comes to him to the PSTN directly.

to check that try to call the account of the GW, and after hearing the PSTN Tone, dial your home number.

if this happened, so your GW not in the Trunk GW mode.

Thank you